Cloud Service Provider Leverages SIP Trunk to Gain Cost Optimum and Seamless Voice Solution


Highlights

  • SIP Trunk: Cost savings as there was no investment on multiple PRI cards
  • Redundancy ensured for uninterrupted incoming calls
  • High uptime and no single point of failure

Introduction

For our customer, every call is important, and it was imperative for them to find a way of managing all their calls efficiently. They required a solution to handle at least 400 concurrent calls while avoiding expensive setups. The setup also had to ensure provisions for redundancy for uninterrupted calling.

For ensuring cost-optimum solution with the required Service Level Agreement (SLA), the TTBS team identified the maintenance of a total of 800 channels, with SIP Trunk 1 hosting Active 400 channels and SIP Trunk 2 hosting the other Passive 400 channels.

Business Challenges

Keeping cost-effectiveness in mind, TTBS delivered SIP Trunk over Ethernet with SDH ring architecture.

From the Last mile, SIP Trunk was terminated over the SBC.

The 4,000 DIDs were split equally between the two trunks.

To achieve 100% concurrency, bandwidth for both trunks supported the aggregate of SIP 1 and SIP

TTBS SIP Trunk is a P2P circuit with /30 IP address assigned by TATA. The same IP address was assigned to the customer PBX’s NIC interface.

The codec on both trunks was configured to comply with the G.711-A law.

The Dual-Tone-MultiFrequency was set at RFC 2833.

“P-Preferred-Identity” header was included in all SIP INVITEs for correct DID CLIP display on the outgoing calls.

DID number sending (DNIS) on SIP INVITE “To” header on the incoming calls .

TTBS ensured the keepalive mechanism through SIP OPTIONS. The expected response was SIP 400 Ok from the CPE device.

The following parameters were provided by TTBS: Customer IP (configured at the SBC’s NIC port) Gateway IP, SIP Server, IP Subnet Mask, Username, Password and DID Range .

TTBS Challenge

  • Cost savings as there was no investment on multiple PRI cards
  • Redundancy ensured for uninterrupted incoming calls
  • High uptime and no single point of failure

To download the case study enter your details

Enter Name
Enter valid Email
Enter Company Name
Enter Valid Mobile Number
Required

You may also like


    Connect With Us

    Request a
    Call Back

    We will be happy to address your queries over a call.

    Click Here

    Connect on
    WhatsApp

    Mon - Fri
    10 am 6 pm

    Connect on Whatsapp Connect on Whatsapp

    Connect
    Toll-Free

    Call us on 1800 266 1800
    or email us

    dobig@tatatel.co.in

    Email us at
    dobig@tatatel.co.in

    Call 1800 266 1800

    Request a
    Call Back

    We will be happy to address your queries over a call.

    Click Here

    Connect on
    WhatsApp

    Mon - Fri
    10 am 6 pm

    Connect on Whatsapp

    Connect
    Toll-Free

    Call us on 1800 266 1515
    or email us

    1515@tatatel.co.in

    Email us at
    1515@tatatel.co.in

    Call 1800 266 1800

    Please Fill in Your Details and We'll Call You Back!

    Please enter Name
    Please enter Organization
    Please Select State
    Please Select City
    Please enter Valid Email
    Please enter valid 10 digit Mobile Number
    Please Select Category
    Please Select Service
    Enter valid OTP
    Please Provide Consent

    Great! Your details have been submitted successfully.
    You will soon hear from us.

    Please Fill in Your Details and We'll Call You Back!

    Please enter Name
    Please enter Organization
    Please enter Valid Email
    Please enter valid 10 digit Mobile Number
    Please Select Category
    Please Select Service
    Enter valid OTP
    Please Provide Consent

    Great! Your details have been submitted successfully.
    You will soon hear from us.